Curabitur placerat magna sollicitudin
Tray or Tape Reel
Tray or Tape Reel Programmer Packing Option
Fixed Tray: It is the standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed. Customer does not need to buy any other accessory while using this option.
Auto tray : This device includes tray in and tray out. Users can put 10 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine.
Tape Reel Packing:
Tape Out Device: Customer should modify and change settings for different IC sizes and only 1 qty of this accessory is needed. Adjusted range is 12mm~40mm Tape Out device is automatically packed, which is optional for air tight type or hot seal type.
Tape in Device: User should configure corresponding Tape In device as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed.
Do you have any questions?