Curabitur placerat magna sollicitudin

2 Programmers in 1: Universal to Gang Programmer

SuperPro 7500N is a high-speed stand-alone Gang programmer that can be used to program up to 4 chips at a time. Optional socket adapters are also available to accommodate PLCC, TSOP, SOIC, SOP, QFP, TSSOP and BGA package types. Many EEPROM/flash/MCU/eMMC chips are also supported in 2-Gang or 4-Gang mode to increase throughput by nearly four times! Each socket module is independent of each other and programming starts automatically when a chip is detected.

SuperPro 7500N can be used as a Universal programmer with single socket. User can buy socket adapter with single socket version and later on upgrade to a 4Gang version if production requirement increases. If a specific 4 gang version is not available, then it will take 2-3 weeks to design and build a new 4gang adapter. For small and medium size chips, SuperPro 7500N is an ideal choice for gang programming.

Need to program more than four chips concurrently? No problem!

Four SuperPro 7500N programmers each having a 4-Gang socket can be operated in stand-alone mode to form a SuperPro 7500N Cluster setup capable of programming 16 devices concurrently. The image below shows how multiple SuperPro 7500N with 4 Gang sockets can be used to program up to 16 high-density chips concurrently. The operator will always be busy in putting in new blank chips and removing programmed chips, thus resulting in 0 idle time and increased throughput.

SuperPro adapters are made with high quality sockets from Yamaichi, Plastronics, 3M, Sensata and Aries Electronics. These brands are not only reliable, but their sockets are specifically designed to have high programming cycle count and suitable for production applications.

Below are some popular 4-Gang socket adapters used with SuperPro 7500N:

GX5113-T001-S4: Gang Adapter with four BGA153 sockets

Support eMMC devices such as Kingston KE4CN, Micron MTFC16GLXDV, Sandisk SDIN5C and Samsung KLM.

GX1016-P008-S4-A: Gang Adapter with four SOIC8 sockets

Support Serial Flash devices such as Spansion S25FL, ST M25P16, Winbond W25Q, EON EN25, Gigadevice GD25Q and Macronix MX25L.

GX1004-T001-H4: Gang Adapter with four TSOP48 Sockets

Support NAND Flash devices such as Toshiba TC58, Hynix HY27, Micron MT29F, Macronix MX30LF, Samsung K9F and Spansion S34ML.

GX5046-T001-S4: Gang Adapter with four BGA63 sockets

Support eMMC devices such as Kingston KE4CN, Micron MTFC, Sandisk SDIN5D, SDIN7D, Samsung KLM and Toshiba THGBM.

How is data security maintained while using standalone programmers?

Project files on SD cards are password protected. Data security is maintained by removing the SD card at the end of each operation from the programmer. If security is a concern for your manufacturing line, you may simply remove the SD card at the end of each operation day. Xeltek provides the safest application in the device programming industry.

The benefits of using Clustered SuperPro Programmers in production mode are:

  • Ultra-Fast programming.
  • Minimal investment in the beginning.
  • Low cost of ownership and easy expandability.
  • Up to 95,000+ devices supported, highest among the gang programmers.
  • All ranges of socket adapters available. Over 1000 socket adapters are available.
  • Minimal downtime and ease of service.
  • Low labor cost of the operator.
  • Secure customer data protection.

What if my chip is not supported?

Xeltek adds requested chip support to SuperPro 7500N device library upon user request in less than two weeks! Industry standard for algorithm update takes around two to three months. Gang socket adapter support for special package types is also available.

Do you have any questions?

Ask Us Now