Cart is empty
SuperPro 5000E is no longer available. Click to view SuperPro 6100
USB Interfaced Ultra-Fast 144pin Stand-Alone Universal Programmer
Highlights
- Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
-
- Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
- Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
- A CF (compact flash) card stores the project files.
- Ultra-Fast Programming Speed: Programs and verifies 64 Mb NOR Flash memory in 11.3 seconds.
- Built-in 144 universal pin drivers
Expanded Features
- Programs devices with Vcc as low as 1.2V.
- Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds.
- Built with 144 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins.
- The programmer operates in either PC hosted mode or stand-alone mode.
- Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
- Under stand-alone mode, the user controls the programmer via
20-characters, 4-line LCD display with 6-KEY - A CF (compact flash) card stores the project files.
- In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
- Over-current and over-voltage protection for safety of the chip and programmer hardware.
- Compatible with Windows XP / Vista / 7 / 8 (32/64 bit)
- Only IC manufacturer approved programming algorithms provide high reliability.
- Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
- Includes the following advanced and powerful software functions:
- Chip operation starts immediately upon proper chip insertion in Production Mode.
- Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
- Password protection provides security for project files and production volume control.
- Batch command combines device operations like program, verify, security into a single command at any sequence.
- Serial number generators are available as standard or customer-specific functions.
- Log file provides production quality tracking.
Restrictions and Compliances
Speed Comparison
|
Device |
Program + Verify (Sec) |
Type |
|
K8P6415UQB |
11.3 |
64Mb NOR FLASH |
|
AM29DL640G |
27.6 |
64Mb NOR FLASH |
|
AT28C64B |
0.9 |
64Kb EEPROM |
|
24AA128 |
4.5 |
128Kb EEPROM |
|
B25F640S33 |
30.4 |
64Mb EEPROM |
|
AT89C55 |
7.5 |
20KB FLASH MCU |
|
ST72F324BK4B5 |
3.8 |
32KB FLASH MCU |
|
MB89F538 |
1.67 |
32KB FLASH MCU |
|
UPD78F9234 |
8.8 |
16KB FLASH MCU |
Software Download & Device List
Product Manual
Posters & Brochures
Hardware & Electrical Specifications
- Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
- Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP
- PC interface: USB2.0 (High speed)
- Stand-alone memory: Compact FLASH Card
- Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A
- Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
- Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)
Warranty Support
All socket adapters come with 30 days warranty. User induced damage is not covered.
Get your free webform with Podio
SuperPro 7500N for Digital Forensics & Data Recovery
In digital forensics and data recovery, access to raw chip data is often critical when conventional methods fail. Mobile phones, hard drives, SSDs, USB devices, embedded systems, and damaged electronics may contain valuable information stored directly inside flash memory, EEPROM, eMMC, NAND, NOR, or microcontroller devices. When the original system is no longer functional, the ability to remove the chip and read its contents directly becomes an essential part of the recovery process.
The SuperPro 7500N is a powerful universal IC programmer designed to support forensic chip reading and raw data retrieval. With support for over 146K+ devices and compatibility with more than 500+ socket adapters, it provides the flexibility needed to work with a wide range of package types and memory devices commonly found in forensic investigations.
Ideal for forensic labs, law enforcement, private investigations, cybersecurity teams, and data recovery specialists.
For forensic professionals, the process typically begins by identifying the chip part number, selecting the proper socket adapter, and using the programmer’s Read function to extract the raw data file. That file can then be analyzed using the investigator’s preferred forensic or recovery software. Because many forensic cases involve unknown or damaged electronics, having a universal programmer with broad device support is a major advantage.
Whether working with law enforcement, private investigations, data recovery labs, or cybersecurity teams, the SuperPro 7500N offers a dependable solution for direct chip access, raw data extraction, and digital evidence recovery.
