SuperPro IS01

SuperPro IS01 is a professional multi-function serial programmer designed for high reliability, fast programming speed, compact portability, and flexible ISP (In-System Programming) applications. It supports a wide range of common serial programmable devices and is ideal for development, production, field service, and third-party system integration.

SuperPro IS01 provides a flexible ISP programming platform; however, in-circuit programming is not a generic plug-and-play solution. Since every customer’s PCB design and application environment is unique, Xeltek engineering develops and validates device algorithms tailored to the customer’s specific application to help ensure stable communication, reliable programming, and proper verification.

The system communicates through a USB 2.0 interface during development and can also operate in stand-alone mode without a PC for production environments.

Applications

Research & Development

Ideal for engineering development, debugging, validation, and prototype programming applications.

Volume Production

Devices can be programmed after the PCB is fully assembled, such as writing serial numbers, MAC addresses, calibration data, or firmware directly to on-board devices.

Field Service

With portable stand-alone operation and SD card support, SuperPro IS01 is ideal for field updates, diagnostics, data acquisition, and service applications.

Third-Party Integration

DLL libraries, Virtual COM commands, ATE interfaces, and USB interfaces make integration into automated systems simple and efficient.

Supported Protocols

I2C SPI UART BDM JTAG CAN RS232 Microwire

Mass Production AUTO Mode

SuperPro IS01 includes an AUTO production mode for automated manufacturing applications. Once the programmer detects the target board and receives the ISP trigger signal, it automatically executes the predefined programming sequence without keyboard operation.

TPIN and TPOUT signals are provided for automation and fixture integration.

Multi-Programming Support

Multiple SuperPro IS01 programmers may be connected simultaneously for programming multiple PCBs in parallel. All units may also operate independently in stand-alone production mode.

Customized ISP Development

You Design the PCB — We Develop the Programming Algorithm

Each ISP solution is tailored to the customer’s PCB specifications because every project and hardware environment is unique.

Circuit design
Voltage conditions
Signal routing
Components connected to programming lines
Protection circuitry

For this reason, Xeltek does not provide a generic off-the-shelf ISP solution. Instead, we develop customized ISP programming algorithms to ensure stable communication, reliable programming, proper verification, and production-ready performance.

Customers may use existing supported device algorithms, whether free or license-based. If the current algorithm does not properly support the customer’s PCB environment or application, Xeltek can provide customized device algorithm development and ISP support.

Additional development fees may apply depending on project complexity.

Contact Us Today for an In-System Programming Quotation

Advanced Software Features

SuperPro IS01 includes powerful yet easy-to-use programming software designed for both engineers and production operators. The software interface is intuitive and requires minimal training while still providing advanced control and automation functionality.

Windows 11 Windows 10

Technical Support

Xeltek proudly provides same-day technical and sales support for customers and representatives worldwide. Our experienced support team assists with device support inquiries, ISP development, programming setup, production integration, troubleshooting, and diagnostics.

	Project Files The project file stores preparations before programming. Users could also restore and save work environment. The project file includes device type, buffer data, operation option settings, configuration bit settings and batch commands. Project files may be password protected to increase security and reliability when operated by untrained operators.
	Project Group: Operate Multiple Project Files in Batch Mode Multiple chips could be programmed simultaneously using the Project Group feature on the SuperPro IS01 software. Project Group organizes batch running of multiple projects and is available on all SuperPro ISP models.
	Auto Function The Auto function organizes different functions into a sequential group (erase, blank check, program, verify and protect). Functions are executed in sequential order similar to a batch command.
	Production Statistics A log file could be used to save operation information before exiting the program. Log files can also be used to facilitate quality tracking.
	Factory Mode This mode is designed for factory volume production To prevent operation errors from destroying chips and wrong data written to the chip, SuperPro will operate in Auto function mode. The administrator can set a password to prevent unauthorized access to the system.
	XPlayer SuperPro IS01 supports JAM, SVF and Staple files from ACTEL, Xilinx and ALTERA. SuperPro IS01 also supports Direct C files from ACTEL. STP or JAM files can be generated using design tools such as ISE and Quartus II.
	LabVIEW Integrating SuperPro IS01 onto an existing LabVIEW environment is a simple task. Previously, users had to purchase DLL functions and create a set of custom VIs for integration, taking days and resulting in expensive engineering time. The LabVIEW driver package is ready to be used in the test program with very little need of coding and customization. Standard LabVIEW driver is available for download.
	Auto Recognition of File Types We support almost all kinds of known file formats including file formats with automatic recognition functions: Binary, Intel (linear & segmented) Hex, Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.
	Auto Increment of Serial Numbers Auto-generation of electronic serial numbers is available on Superpro IS01. This feature is implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode.
	Intellectual Property Protection Password settings available in both PC and stand-alone mode.

Hardware & electrical Specifications

Supports all common ISP protocol (i.e. I2C, SPI, UART, BDM, MW, JTAG, CAN, RS232). Contact Xeltek for more details
Provides VDD (0.5A) output line and VPP(0.2A)
Operating Temperature 10-50ºC
ESD protection - I/O level is adjusted via SuperProIS01 software (1.5V ~ 4V)
Online software operates the programmer and manages offline project via USB2.0
When operated offline, operations are shown through the built-in LCD screen, keypad and LED status indicator.
Project files could be stored using a removable SD card (Max. 4GB)
The ATE interface allows operating and controlling the programmer through external signals. There are six project selection lines (SEL0 - SEL5), two command input lines (START and STOP) and three status output lines (PASS, FAIL and BUSY). External signals are isolated from the system from optocouplers
12V DC / 2A system external power input

Expanded Features

High programming speed selectable: Adapt to cable length and load feature for target board.
Supports online (USB2.0 high-speed) and offline mode simultaneously.
Supports all common ISP protocol (i.e. I2C, SPI, UART, BDM, MW, JTAG, CAN, RS232).
Contains Automatic Test Equipment (ATE) interface for automated operation.
Built-in overcurrent protection function.
Field proven for R&D, mass production and individual in-system programming projects.
The programmer operates in either PC hosted mode or stand-alone mode.
- Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection for device programming.
- Under stand-alone mode, the user controls the programmer via a build-in LCD screen and keypad.
- A SD card stores project files.
Compatible with Windows XP / Vista / 7 / 8 / 10 (32/64 bit)

Warranty Support

Standard Warranty

Included with the purchase of SuperPro IS01

Two-Year Hardware Warranty: Covers hardware repair services for two years from the purchase date.
Device Updates: User-requested device updates are available during the first year of purchase.**
Shipping for RMA Items:
- Xeltek covers FedEx Ground shipping for return shipments to domestic (USA) addresses only.
- International customers are responsible for shipping costs both ways.
Defect Coverage: Programmers are warranted against manufacturing or workmanship defects for two years from the date of purchase.
Technical Support:
- For assistance, contact Xeltek via email techsupport@xeltek.com.
- Calls are handled in the order they are received. Due to high call volume, written requests are prioritized for faster response.
- Support is available Monday–Friday, 8:00 AM to 4:30 PM (PST).
Out-of-Warranty Services: Additional service fees apply for items outside the warranty period.