SuperBot-2 Automated IC Programmer

SB-02

16-Socket Automated IC Programmer

Equipped with four ultra-high speed universal gang programmers - SuperPro 7500. Each with up to 4 sockets. Capable of supporting most MCU, CPLD, serial and parallel NOR/NAND FLASH. SuperBOT 2 comes with 4 independent socket pressing actuators and a CCD camera. Up to 1200 unites per hour (UPH) for devices with programming time less than 50 sec. Throughput 0.6 to 30 times higher than SuperBOT-1 especially higher for large capacity devices like eMMC, NAND /NOR FLASH and SPI FLASH. Suitable for both small and large capacity devices.

Worldwide Shipping

SuperBOT 2

Fully Automated IC Programmer - up to 16-Sockets


The SuperBOT 2 is an all-around affordable automated IC programmer. The SuperBOT 2 features tray, tube, and tape I/O, and ink or laser marking. This automated system was designed to accommodate most IC devices on the market such as NOR flash, microcontrollers, NAND, etc. Today, our SuperBOT 2 supports over 106K devices with over 500 different adapters to program many common and uncommon package types. If you're looking for a reliable, high performing, and budget-friendly automated IC programmer the SuperBOT 2 is the clear choice.

Standard Features

Model SuperBOT 2
Units Per Hour 1,200

Nozzles Single
Tray Single Manual Tray
Programmer SuperPro® 7500N
Sockets 16
Adapters 4
Vision Check Dual Camera
Tape Input Dual
Operating System Windows™
Computer
Built-In Industrial PC 



Devices and Packages 

Supports: NAND, eMMC, NOR Flash and other device memories on the market

Package: WLCSP, SOT, BGA, TSSOP, PLCC & ETC

Size: 2mm - 25mm


Optional Accessories

Tray (up to 20 trays), tape in/out, tube in/out, and laser or ink marking

Support and Warranty

Free factory training

5 years remote support and 1 year parts warranty

Real time support via direct message

Xeltek has been an industry leader for over 25 years, providing affordable reliable machines, quick support and responsive trouble shooting. 

Lowest Total Cost of Ownership

Xeltek provides free remote support for up to 5 years exclusive of material cost. 

Many customers come back to Xeltek for an upgrade within this period and use their current machine as a trade-in. 

Save a bundle with Xeltek SuperBOTs.

High Throughput SuperBot 2 is based on a high performance servo system that can program up to 1200 UPH (units per hour) (for devices with programming time less than 36 sec) and is suitable for both small and large capacity devices. Throughput is up to 30 times higher than SuperBot 1, especially higher for large capacity devices like eMMC, NAND/NOR FLASH, SPI FLASH. It can be operated 24x7 and can provide throughput of 864,000 UPM (units per month). One person can supervise many SuperBOT machines and once they are programmed they can usually be left to operate by themselves.
High Performance Programmers SuperBot 2 is equipped with four SuperPro 7500 high speed universal programmers. Depending on the device programmed, each SuperPro 7500 can have up to 4 sockets with a total of up to 16 sockets in the system. Most programmers in the market use technology which is up to 10 years old. The best current hardware technology is to use a high speed MCU chip built inside the programmer. SuperPro 7500 programmers employ a very high-speed MCU chip producing not only reliable programming algorithms but also increasing programming speed. Utilization of ARM11 32bit MCU combined with an internal Linux operating system makes them the most advanced and versatile programmers in the industry.
LAN Operation Most volume programming applications need programmers to be operated remotely and this can be achieved by using the LAN port on SuperBOT programmers. Programmers can be connected to a local network and be remotely controlled by any computer on the network via LAN (100M) port. LAN port enables remote project loading, quality monitoring, volume control, file security. Technical department can remote control programming operations and processes, including downloading project file, command execution, project settings, and obtain real time information to achieve production goals. Remote network management provides the most protection for intellectual property. Project data and files are never shared with operators because files are remotely loaded by authorized engineers.
The Most Durable and Reliable Systems in the Industry China is the hub of the world Electronics manufacturing and Xeltek automated programmers are widely installed at most major Electronic manufacturing plants with multiple installations at many locations. Most companies run production 24 hours/day and 7 days/week programming millions of devices per year. Xeltek automated programmers have been refined to run non-stop, withstand harsh and battle-ground like environment.
Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. Xeltek currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.
Better Yield Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Algorithms are performed with state machine architecture constructed with FPGA to achieve an ultrahigh programming speed. Along with the lo w voltage components selection, they program devices down to 1.2 volts.
Lowest Cost Automated Programming System in Market SuperBot automated programmers are the most affordable and high value systems in the industry. High volume and extensive production experience enables the programmers to be the most competitive in terms of quality, price, and value in the programming industry.
Powerful and Intelligent Software User-friendly software with graphical interface cuts learning curve. Setup data saved for next operation. Software also includes resourceful log table, convenient production and quality tracking, authorization, flexible stopping strategy for bad socket or module.
Chip Size Devices between 2x2mm to 30x30mm can be programmed. SuperBot 2 supports the SOT23 package which measures only 2x3mm. We do not know of any other manufacturer who supports such a small package type and this is a testimony that SuperBot 2 excels in its accuracy and precision.
Short change-over time I/O devices and socket adapters are easily interchangeable and socket positioning can be performed automatically. Auto Tray and Tape-out can be permanently attached to SuperBot eliminating changeover time when moving from tape-out to auto tray. Tape-in feeder changeover time is below 10 minutes and laser marker changeover time between tray to tape is under 15 minutes.
Socket Cost and Investment Cost recovery in short period with low investment in the beginning as socket adapters are universal for up to 144 pin chips. For most of competitor programmers, user has to invest on device specific socket adapters for chips greater than 48 pins thus increasing cost in long term.
Technical Support More than 30 engineers are devoted to developing new programmers, socket adapters and device algorithms. Engineers are fluent in English and provide excellent direct support through emails, telephone, live chat an online ticketing system. With our locations in the United Stated and China, providing 17 hours of continuous support worldwide daily, we are confident to be able to provide support anywhere in the world.

Motion System

Motion System

High Precision Servo System

Resolution

X axis: ±0.02mm; Y axis: ±0.02mm; Z axis: ±0.02mm; θaxis: ±0.1°

Stroke

X axis: 1000mm; Y axis: 500mm; Z axis: 40mm

Pick & Place Header Accuracy

±0.07mm

Operable Chip Size

Minimum: 2x2mm; Maximoum: 25x25mm

Maximum Throughput

1200 Units Per Hour

 

Vision System

Camera

Downward CCD camera for sockets / pick & place spots positioning. 512×512 pixels

Field of View

30x30mm

 

Electrical & Hardware Specifications

Devices Supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc.

Package

DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP etc.

Power Supply

Electrical Spec. of the AC adapter: AC input 90V to 250V, 50/60Hz, DC output AC 220V; Power: 2KW

Power Consumption

1.5KVA

Air

Clean, pressure: 0.6MPa, consumption: 30 liter/min

Size

Main Machine

Auto Tray

Tape-Out

820(L)×640(W)×1550(H) mm

1100(L)×380(W)×1300(H) mm

1100(L)×380(W)×1300(H)

Weight

Main machine: 248 Kg

PC Interface  

USB 2.0, LAN

Shipping Dimension

Main Machine

Auto Tray

Tape-Out

900(L)×800(W)×1410(H) mm

1170(L)×620(W)×1350(H) mm

130(L)×600(W)×11660(H) mm

Shipping Weight      

Main machine: 260 Kg

Auto Tray: 140 Kg

 Tape Out: 140 Kg

 

 

Manual Tray (Standard equipped) Standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed. Customer does not need to buy any other accessory while using this option.

Auto Tray Device This device is an extension of the fixed tray. It includes tray-in and tray-out and users can put 20 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine. The auto tray device can also be installed outside of the whole machine and trays can be automatically changed without the need to open the upper cover, which saves tray changeover space and avoid human error during tray changeover. The auto tray device can stack up to 20 JEDEC trays. 

Tape-In Device Electric Tape in feeder. Tape width between 8 and 32mm applicable. Tape-in device can be configured as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed. 

Tape-Out Device Connects to a SuperBOT for fully automatic operation. 8-32 mm tape widths can be used with the device. Output reel is sealed with heated tape. 

Tube-In Moves chips in the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly.

Tube-Out Moves chips out of the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly. 

Laser Marker System An optional attachment to the tape-out or the auto tray device for high speed marking. It marks up to 4 characters on the passed chips. 

Tape Ink-Marker Add-on item for tape out machine. On completion of programming the chip can be automatically marked with a point using ink (optional).  Tray Ink Marker Add-on item for auto tray machine. On completion of the programming the chip can be automatically marked with a point using ink (optional). 




Get your free webform with Podio