- 11%
SuperPro 6100

SuperPro 6100

List price: $1,795.00  
$1,595.00
You save: $200.00 (11%)
SP6100

In Stock: Free Shipping Worldwide

+
Add to wish list

Ultra-High Speed Stand-Alone Universal Device Programmer

With Highest Device Support in the Industry



SuperPro 6100 is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.

Application and target customers: Programming houses, electronic repair, car repair shops, forensic and data recovery companies, medical devices, requirement for larger device support.


Advantages of SuperPro 6100

Ultra Fast Programming Speed SuperPro 6100 is designed with high programming speed in mind. Our semiconductor manufacturer approved algorithms, precision and clean signals guarantee high programming yield. Special design was made to eliminate overshoot and ground bounce. Algorithms are performed with state machine architecture constructed with FPGA to achieve a ultra-high programming speed.
Largest Device Support Located in Silicon Valley, we keep good relationships with many major IC companies that are important for us to continuously support new devices. SuperPro 6100 currently supports more than 100,000 devices, which is the largest device library in the programming industry. Requested device algorithms can be added within a week - average lead time from other manufacturers is over two months.
Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 6100 is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.
Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 6100 is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 6100 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.
Tester for Logic Devices and SRAMs In addition to having a large device library, SuperPro 6100 programmer is also designed for IC testing of various devices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices .
Technical Support Xeltek is proud to offer same day support for technical and sales inquiries. We are available to help customers and representatives resolve issues or help with their requests in an effective way. This service is provided by our highly qualified new support team that will provide the best of their knowledge to bring prompt sales and technical support.



Advanced Software Features

SuperPro 6100 comes with a powerful and easy to use programming software. The biggest advantage is its simplicity so that any operator can operate the programmer with little or no training. SuperPro 6100 software is supported on Windows Vista, 7, 8, and 10.






Project Files The project file stores preparations before programming. Users could also restore and save work environment. The project file includes device type, buffer data, operation option settings, configuration bit settings and batch commands. Project files may be password protected to increase security and reliability when operated by untrained operators.
Auto Function The Auto function organizes different functions into a sequential group (erase, blank check, program, verify and protect). Functions are executed in sequential order similar to a batch command.
Production Mode Once a chip is inserted correctly, the programmer automatically starts batch command of erase, blank check, program and verify. Auto chip detection saves time and increases efficiency.
Production Statistics A log file could be used to save operation information before exiting the program. Log files can also be used to facilitate quality tracking.
Factory Mode This mode is designed for factory volume production. To prevent operation errors from destroying chips and wrong data written to the chip, SuperPro will operate in the Auto function mode.The administrator can set a password to prevent unauthorized access to the system.
Auto Recognition of File Types We support almost all kinds of known file formats including file formats with automatic recognition functions: Binary, Intel (linear & segmented) Hex, Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.
Auto Increment of Serial Numbers Auto-generation of electronic serial numbers is available on Superpro 6100. This feature is implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode.
Intellectual Property Protection Password settings available in both PC and stand-alone mode.


Certificates

CE Compliant RoHS Compliant ISO 9001 Certified ISO 4001


What's in the box?


SuperPro 6100 comes with

  • DX0001 DIP48 Adapter
  • Software CD
  • AC Adapter
  • USB Cable
Optional Accessories



Do you have any questions about SuperPro 6100?


Ask Us Now


Hardware and Electrical Specifications


Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)


Expanded Features

  • Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.
  • Support devices with Vcc from 1.2V - 5V.
  • Support files up to 256 GB.
  • Over-current and over-voltage protection for safety of the chip and programmer hardware.
  • Only IC manufacturer approved programming algorithms used for high reliability.
  • Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

What is the difference between SuperPro 6100, 7500 and 6104GP?

Please refer here to know differences between these programmers.

How can I test the SuperPro 6100 software before buying the programmer? Can I test it under demo mode?

You can download software and manual from the software download center. The software will work as demo mode without installing programmer.

How to use SuperPro 6100 programmers in standalone mode?

SuperPro 6100 programmers use CF Card (not included) for standalone programming. Download SuperPro 6100 Operation manual Guide

Is my device supported on SuperPro 6100? What if my chip is not supported by this programmer?

SuperPro 6100 supports a total of 99,900+ programmable chips. Here is the list of all supported devices on SuperPro 6100. You may also use our device search tool to find out regarding device support and socket adapters. If you need any help in using device search tool, please click here. If your IC is not listed in the device list we can add it to our library free of charge. Please contact techsupport@xeltek.com for details.

What socket adapter should I use? Where can I find list of all socket adapters for SuperPro 6100?

Please use our device search tool for finding appropriate socket adapter for your programmer. Please also click following list for full list of socket adapters compatible with SuperPro 6100.

I am new to NAND Flash programming. Can you provide some basic introduction?

Overview of how NAND devices are programmed on Xeltek Programmers can be found here:

Does SuperPro 6100 support serialization with auto serial number generation?

Yes, the feature of auto-generation of electronic serial numbers is available on SuperPro 6100. It is implemented by setting Auto Increment option in the operation option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode. Please refer to the instructions for Auto Increment on Page 40 in the attached SuperPro 6100 manual.

Does SuperPro 6100 work with third-party socket adapters?

Xeltek adapters are designed to be compatible with the programmer software. We suggest you to choose the socket adapter from Xeltek since the result of using third party adapter cannot be guaranteed.

I have an old Xeltek programmer. Do you have any trade-in program?

Yes, our trade-in policy helps customers recover value on older programmers. Please refer our trade in policy for details.


If any of your questions is not covered in above FAQs, please refer to our main FAQ page or contact sales@xeltek.com or techsupport@xeltek.com for further questions regarding this product.

Software Download & Device List

SuperPro 6100 Software Device List User's Manual
Last updated: 07/21/2016 Manual (01/01/14)

The software works without SuperPro 6100 - feel free to try it to see how it works


Can't find your device on the device list? Request device support.

SuperPro 6100 Brochure & Poster

We have an older Data I/O machine that i was replacing. Originally, I contacted them to develop a quote for a new one. They were unresponsive and did not take the time to review my parts. Chirag Kapoor was very helpful and the price was cheaper. So, it became a no brainer.
Xeltek makes great programmers at an economical cost. Teir products meet all oru needs and their support really work to keep us in production. Thank you Xeltek!
Their tech support was very responsive and helpful.
Fast and easy to use
Perfect.
Good.
I would like to send special thanks to Chirag Kapoor and his team for helping us with the chip programming project. He was able to identify the problem we were having with the programming of the new flash chip and found a solution that worked well for us. Thank you Xeltek from your loyal 24-years customer.
Excellent! The support I received from Aaron was really helpful, no doubt to recommend you, THANKS SO MUCH!
For my needs today it was easy to navigate. I did not find what I was looking for so I called Tech Support. He, Aaron, was very efficient and knowledgeable about my problem. He solved my problem in a timely fashion. I am up and running.
Very helpful, responsive group. Thank you.
Write a review

Warranty Support

  • Two-year warranty on hardware repair services.
  • User requested device updates available during the first year of purchase.*
  • Xeltek covers FedEx Ground when shipping RMA items back to domestic (USA) addresses only.
  • International customers are responsible for shipments both ways.
  • Programmers are warranted to be free of manufacturing or workmanship defects for two years from the date of purchase.
  • For technical support, contact Xeltek via Repair Request or Ticketing System Calls will be answered in the order it was received. Due to high volume of calls, representatives will respond faster through written request. Calls are accepted during business hours Monday - Friday, 7:30 AM - 4:30 PM (PST).
  • Additional service fee applies to out-of-warranty items.
  • Effective as of February 1, 2013.


*Available on selected Programmers: SuperPro 7500, SuperPro 6100, and SuperPro 6104GP. Due to sample limitations on obsolete devices, support time may vary. Customers are welcome to provide chip samples to expedite algorithm support. XELTEKadds devices upon customer's request at its option. Additional non-recurring engineering (NRE) charge may apply if device update involves socket adapter designing. Device support for out-of-warranty items is $150 -$300 per device request.

Similar Products Similar Products