SuperPro 6100N - Rental

SP6100N-RENTAL

Usually Ships in 10-15 Business Days

Rent the  SuperPro 6100N universal device programmer.
$399.00 for the 1st month and $160.00 for additional months
Great for rework, chip testing, data extraction and programming.
SuperPro 6100N is compatible for most device memory except NAND or eMMC.
For NAND & eMMC devices you may rent our SuperPro 7500.

Features:
•Technical support available without additional cost.
•First article available, we program a couple chips for your testing.
•Project file provided for a play & play solution. Xeltek will generate your project file, based on your data file & requirements.
•Free data extraction for each project without a data file. Data file will be provided in hex or binary for future use.
Master chip will be used for data extraction which must not be protected or secured.

Terms:
1. Full equipment cost less the 1st month, payment shall be authorized on your credit card.
2. Rental shall continue monthly automatically until terminated.
3. Any damage caused to the equipment shall be reimbursed.
4. Rental payment shall include any applicable tax and shipping charge.
5. Return shipping should be postage prepaid.
6. 1 month rental minimum
7. Security deposit & credit card on file required.
8 .Socket adapters not included, adapters must be purchased based on your package type.
9. Rental program available for USA & Canada customers.

Contact us today - Click here

Socket adapters sold separately.

To find the compatible adapter for your chip please visit our Device Search Tool.


DIP Socket Adapter: 

DX0001(SuperPro 6100N and SuperPro 6104NGP)

GX0001 (SuperPro 7500 and SuperPro 7504)

Hardware and Electrical Specifications


Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Stand-alone memory

Compact FLASH Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 148(L) x 216(W) x 94(H) mm

Package: 301(L) x 252(W) x 145(H) mm

Weight

Main unit: Weight 3.5 lbs (1.6 Kg)

Package: Weight 6.2 lbs (2.8Kg)


Expanded Features

  • Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.
  • Support devices with Vcc from 1.2V - 5V.
  • Support files up to 256 GB.
  • Over-current and over-voltage protection for safety of the chip and programmer hardware.
  • Only IC manufacturer approved programming algorithms used for high reliability.
  • Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

What is the difference between SuperPro 6100, 7500 and 6104GP?

Please refer here to know differences between these programmers.

How can I test the SuperPro 6100 software before buying the programmer? Can I test it under demo mode?

You can download software and manual from the software download center. The software will work as demo mode without installing programmer.

How to use SuperPro 6100 programmers in standalone mode?

SuperPro 6100 programmers use CF Card (not included) for standalone programming. Download SuperPro 6100 Operation manual Guide

Is my device supported on SuperPro 6100? What if my chip is not supported by this programmer?

SuperPro 6100 supports a total of 99,900+ programmable chips. Here is the list of all supported devices on SuperPro 6100. You may also use our device search tool to find out regarding device support and socket adapters. If you need any help in using device search tool, please click here. If your IC is not listed in the device list we can add it to our library free of charge. Please contact techsupport@xeltek.com for details.

What socket adapter should I use? Where can I find list of all socket adapters for SuperPro 6100?

Please use our device search tool for finding appropriate socket adapter for your programmer. Please also click following list for full list of socket adapters compatible with SuperPro 6100.

I am new to NAND Flash programming. Can you provide some basic introduction?

Overview of how NAND devices are programmed on Xeltek Programmers can be found here:

Does SuperPro 6100 support serialization with auto serial number generation?

Yes, the feature of auto-generation of electronic serial numbers is available on SuperPro 6100. It is implemented by setting Auto Increment option in the operation option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode. Please refer to the instructions for Auto Increment on Page 40 in the attached SuperPro 6100 manual.

Does SuperPro 6100 work with third-party socket adapters?

Xeltek adapters are designed to be compatible with the programmer software. We suggest you to choose the socket adapter from Xeltek since the result of using third party adapter cannot be guaranteed.

I have an old Xeltek programmer. Do you have any trade-in program?

Yes, our trade-in policy helps customers recover value on older programmers. Please refer our trade in policy for details.


If any of your questions is not covered in above FAQs, please refer to our main FAQ page or contact sales@xeltek.com or techsupport@xeltek.com for further questions regarding this product.

Manual Tray (Standard equipped) Standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed. Customer does not need to buy any other accessory while using this option.

Auto Tray Device This device is an extension of the fixed tray. It includes tray-in and tray-out and users can put 20 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine. The auto tray device can also be installed outside of the whole machine and trays can be automatically changed without the need to open the upper cover, which saves tray changeover space and avoid human error during tray changeover. The auto tray device can stack up to 20 JEDEC trays. Watch video

Tape-In Device Electric Tape in feeder. Tape width between 8 and 32mm applicable. Tape-in device can be configured as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed. Watch video

Tape-Out Device Connects to a SuperBOT2 or SuperBOT3 for fully automatic operation. 8-32 mm tape widths can be used with the device. Output reel is sealed with heated tape. Watch video

Tube-In Moves chips in the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly.

Tube-Out Moves chips out of the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly. Watch video

Laser Marker System An optional attachment to the tape-out or the auto tray device for high speed marking. It marks up to 4 characters on the passed chips. Watch video

Tape Ink-Marker Add-on item for tape out machine. On completion of programming the chip can be automatically marked with a point using ink (optional). Watch videoTray Ink Marker Add-on item for auto tray machine. On completion of the programming the chip can be automatically marked with a point using ink (optional). Watch video