SuperPro 610P - Rental

SP610P-rental

Usually Ships in 10-15 Business Days

Rent the SuperPro 610p.
$124.00 for the 1st month and $50.00 for additional months
Great for rework, chip testing, data extraction and programming.
SuperPro 610P is compatible for most device memory with 48pins or less.
Features:
•Technical support available without additional cost.
•First article available, we program a couple chips for your testing.
•Project file provided for a play & play solution. Xeltek will generate your project file, based on your data file & requirements.
•Free data extraction for each project without a data file. Data file will be provided in hex or binary for future use.
Master chip will be used for data extraction which must not be protected or secured.


Terms:
1. Full equipment cost less the 1st month, payment shall be authorized on your credit card.
2. Rental shall continue monthly automatically until terminated.
3. Any damage caused to the equipment shall be reimbursed.
4. Rental payment shall include any applicable tax and shipping charge.
5. Return shipping should be postage prepaid.
6. 1 month rental minimum
7. Security deposit & credit card on file required.
8 .Socket adapters not included, adapters must be purchased based on your package type.
9. Rental program available for USA & Canada customers.

Contact us today - Click here


Socket adapters sold separately.

To find the compatible adapter for your chip please visit our Device Search Tool.


DIP Socket Adapter: 

DX0001(SuperPro 6100N and SuperPro 6104NGP)

GX0001 (SuperPro 7500 and SuperPro 7504)

Hardware and Electrical Specifications


Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 178(L) x 130(W) x 40(H) mm

Package: 320(L) x 300(W) x 85(H) mm

Weight

Main unit: Weight 0.85 lbs (0.38 Kg)

Package: Weight 3 lbs (1.8Kg)


Expanded Features

  • Universal 48-pin driver supports today's most complex devices
  • Improved programming processor for high-speed programming
  • Programs devices with Vcc as low as 1.2V
  • In-system programming (ISP / ICP) capability
  • Programming / testing features for TTL/CMOS logic ICs and memories
  • Only IC manufacturer approved programming algorithms used for high reliability
  • Over-current and over-voltage protection for safety of the chip and programmer hardware
  • Compatible with Windows XP / Vista / 7 / 8 / 10 (32/64 bit)
  • Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability

Warranty Support

Standard Warranty: Included with the purchase of SuperPro 610P.

  • Free two-year warranty on hardware repair services.
  • Xeltek covers FedEx Ground when shipping RMA items back to domestic (USA) addresses only.
  • International customers are responsible for shipments both ways.
  • Programmers are warranted to be free of manufacturing or workmanship defects for two years from the date of purchase.
  • For technical support, contact Xeltek via Repair Request or at techsupport@xeltek.com. Calls will be answered in the order it was received. Due to high volume of calls, representatives will respond faster through written requests via methods above. Calls are accepted during business hours Monday - Friday, 8:00 AM - 4:30 PM (PST).
  • Additional service charge applies to out-of-warranty items.
  • Effective as of February 1, 2013.
 

 

Manual Tray (Standard equipped) Standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed. Customer does not need to buy any other accessory while using this option.

Auto Tray Device This device is an extension of the fixed tray. It includes tray-in and tray-out and users can put 20 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine. The auto tray device can also be installed outside of the whole machine and trays can be automatically changed without the need to open the upper cover, which saves tray changeover space and avoid human error during tray changeover. The auto tray device can stack up to 20 JEDEC trays. Watch video

Tape-In Device Electric Tape in feeder. Tape width between 8 and 32mm applicable. Tape-in device can be configured as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed. Watch video

Tape-Out Device Connects to a SuperBOT2 or SuperBOT3 for fully automatic operation. 8-32 mm tape widths can be used with the device. Output reel is sealed with heated tape. Watch video

Tube-In Moves chips in the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly.

Tube-Out Moves chips out of the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly. Watch video

Laser Marker System An optional attachment to the tape-out or the auto tray device for high speed marking. It marks up to 4 characters on the passed chips. Watch video

Tape Ink-Marker Add-on item for tape out machine. On completion of programming the chip can be automatically marked with a point using ink (optional). Watch videoTray Ink Marker Add-on item for auto tray machine. On completion of the programming the chip can be automatically marked with a point using ink (optional). Watch video