Ultra-High Speed Lowest Cost Stand-Alone Universal Device Programmer; USB 2.0 Interfaced
Highlights
- Lowest cost Stand-alone Programmer: With ARM7 MCU it gives ultra-fast programming experience.
- Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
- Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
- Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
- A CF (compact flash) card stores the project files.
- Programs devices with Vcc as low as 1.2V
- Built-in 48 universal pin drivers
- CE and ROHS Compliant
Expanded Features
- Programs devices with Vcc as low as 1.2V.
- Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds.
- Built with 48 universal pin-drivers for support of today's most complex devices. Universal and device independent socket adapters are available for various packages.
- The programmer operates in either PC hosted mode or stand-alone mode.
- Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
- Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad. A CF (compact flash) card stores the project files. In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system.
- ISP/ICP programming capability through optional ISP/ICP adapter.
- Programming /testing features for TTL/CMOS logic ICs and memories.
- Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
- Provides over-current and over-voltage protection for safety of the chip and programmer hardware.
- Compatible with Windows XP / Vista / 7 / 8 (32/64 bit).
- Includes the following advanced and powerful software functions:
- Chip operation starts immediately upon proper chip insertion in Production Mode.
- The Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
- Password protection provides security for project files and production volume control.
- The Batch command combines device operations like program, verify, security into a single command at any sequence.
- Serial number generators are available as standard or customer-specific functions.
- A Log file provides quality tracking
Speed Comparison
Device |
Program + Verify (Sec) |
Compare with SP3000U |
Type |
AT28C64B |
0.8(P)+0.1(V)= 0.9(s) |
1.2(P)+0.8(V)= 2.0(s) |
64Kb EEPROM |
24AA128 |
2.7(P)+1.8(V)= 4.5(s) |
5.0(P)+4.0(V)= 9.0(s) |
128Kb EEPROM |
QB25F640S33B60 |
29.0(P)+14.4(V)= 43.4(s) |
55.2(P)+41.4(V)= 96.6(s) |
64Mb EEPROM |
AT89C55WD |
2.5(P)+0.4(V)= 2.9(s) |
3.3(P)+1.0(V)= 4.3(s) |
20KB FLASH MCU |
S25FL064A |
43.9(P)+14.7(V)= 58.6(s) |
72.8(P)+41.4(V)= 114.2(s) |
64Mb SPI EEPROM |
PIC16F876A |
10.1(P)+0.8(V)= 10.9(s) |
22.1(P)+06.2(V)= 28.3(s) |
|
PIC18F442 |
5.1(P)+1.1(V)= 6.2(s) |
13.6(P)+06.7(V)=20.3(s) |
Software Download & Device List
Product Manual
Posters & Brochures
Hardware & electrical Specifications
- Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
- Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,…
- PC interface: USB2.0 (High speed)
- Stand-alone memory: Compact FLASH Card
- Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/2A
- Main unit: Dimensions 205mm (L) * 148mm (W) * 50mm (H) Weight 1.35 lbs (0.6Kg)
- Package: Dimensions 320mm (L) * 300mm (W) * 85mm (H) Weight 4lbs (1.8Kg)
Items Included
- SuperPro 501S Programmer w/ 48pin driver
- AC adapter
- Software CD
- USB Cable
PRODUCT
SEARCH
SEARCH