SuperPro X108


Usually Ships in 10-15 Business Days


SuperPro X108

8 Socket Production Programmer

Speed up high density chip programming with SuperPro X108, engineered to program up 8 IC devices. 

Recommended for eMMC, NAND and Microcontroller memory chips. 

SPX108 supports most IC manufacturers and other memory devices.

Key Features

  • Programs & Verify eMMC devices in 30seconds
  • Programs & Verify NAND FLASH devices in 35seconds
  • Program 8 eMMC or NAND flash devices simultaneously.
  • Approved programming algorithms from IC Manufacturers


Advanced and powerful software functions.

  • Production mode Automatically begins programming operations once chip is inserted in socket.
  • Project function Set configurations once and save your project requirements for future use. Project file includes data file, configurations, programming operations.
  • Password Set a protected project file and control production volume
  • Batch command Combine programming operations like program, verify, security into a single command at any sequence.
  • Dynamic buffer Allowing you to program each chip with a different data file. Applications including serial number, MAC address etc.
  • Gang expansion Connect up 12 SPX108 to meet production demands. Manage all units under one GUI as a concurrent production programmer.
  • JAM/STAPL Player and Direct C Compatible.
  • Log file and statistic table for quality control
  • MES and Industrial 4 Compatible Remote communication interface and run-time database available.


Electrical and Mechanical Specification

  • PC Interface: USB3.0
  • Windows™ 7/8/10
  • GND banana jack
  • Power Supply: AC Adaptor Input AC 100V- 240V; Output: 12V/1.5A

Speed comparison

  • Speed much higher than SuperPro/7500 for eMMC, NAND FLASH etc.






P+V timeS


















Warranty Support

Standard Warranty: Included with the purchase of SuperPro X108

  • Two-year warranty on hardware repair services.
  • User requested device updates available during the first year of purchase.**
  • Xeltek covers FedEx Ground when shipping RMA items back to domestic (USA) addresses only.
  • International customers are responsible for shipments both ways.
  • Programmers are warranted to be free of manufacturing or workmanship defects for two years from the date of purchase.
  • For technical support, contact Xeltek via Repair Request or at Calls will be answered in the order it was received. Due to high volume of calls, representatives will respond faster through written request. Calls are accepted during business hours Monday - Friday, 8:00 AM - 4:30 PM (PST).
  • Additional service fee applies to out-of-warranty items.

*Available on selected Programmers: SuperPro X108, SuperPro 7500, SuperPro 6100N, and SuperPro 6104NGP.  Due to sample limitations on obsolete devices, support time may vary. Customers are welcome to provide chip samples to expedite algorithm support. XELTEK adds devices upon customer's request at its option. Additional non-recurring engineering (NRE) charge may apply if device update involves socket adapter designing. Device support for out-of-warranty items is $150 -$300 per device request.

Manual Tray (Standard equipped) Standard I/O device of the machine. Operator will replace the programmed tray from the SuperBot machine manually after the full tray is programmed. Customer does not need to buy any other accessory while using this option.

Auto Tray Device This device is an extension of the fixed tray. It includes tray-in and tray-out and users can put 20 trays into the device. When the machine is running, users can add trays or take out trays without stopping the machine. The auto tray device can also be installed outside of the whole machine and trays can be automatically changed without the need to open the upper cover, which saves tray changeover space and avoid human error during tray changeover. The auto tray device can stack up to 20 JEDEC trays. Watch video

Tape-In Device Electric Tape in feeder. Tape width between 8 and 32mm applicable. Tape-in device can be configured as per the chip to be programmed. For SOIC and TSOP packages customer will need 2-3 types of different tape in the devices depending on the width of chips to be programmed. Watch video

Tape-Out Device Connects to a SuperBOT2 or SuperBOT3 for fully automatic operation. 8-32 mm tape widths can be used with the device. Output reel is sealed with heated tape. Watch video

Tube-In Moves chips in the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly.

Tube-Out Moves chips out of the machine. Chip guider for different chip width (optional). IO is multi feed and upto 8 tubes can be operated at once (optional). Tube IO pages should also be updated accordingly. Watch video

Laser Marker System An optional attachment to the tape-out or the auto tray device for high speed marking. It marks up to 4 characters on the passed chips. Watch video

Tape Ink-Marker Add-on item for tape out machine. On completion of programming the chip can be automatically marked with a point using ink (optional). Watch videoTray Ink Marker Add-on item for auto tray machine. On completion of the programming the chip can be automatically marked with a point using ink (optional). Watch video