SuperPro 7500

SuperPro 7500

 
$2,395.00
SP7500

Free Shipping Worldwide

+
Add to wish list

High Speed 4 Gang Stand-Alone Universal Device Programmer

Meet the NEW STANDARD in the universal programming industry. The ultra powerful system engine allows to program either single or 4 chips simultaneously with equal ease. Convert the universal programmer into a 4 gang programmer just by inserting a 4-socket adapter. No need to buy an expensive gang programmer anymore and save thousands.




Advantages of SuperPro 7500

Ultra Fast Programming Speed SuperPro 7500 programmers employ a very high speed MCU chip producing not only reliable programming algorithms, but also increasing programming speed. Utilization of ARM11 32bit MCU combined with an internal Linux operating system makes them the most advanced and versatile programmers in the industry. Superpro 7500 offers 30% higher programming speed and 8-10 times faster programming speed for eMMC devices as compared to Superpro 6100.
Customized 4 Gang Adapters SuperPro 7500 can be used to program up to 4 chips at a time. Many EEPROM / Flash / MCU / eMMC chips are also supported in 2-Gang or 4-Gang mode to increase throughput by nearly four times!
LAN Mode Most production programming applications need the programmer to be operated remotely. On SuperPro 7500, remote controlling can be achieved using the LAN port. Using the LAN port, programmers can be connected to a local network and can be remotely controlled via any computer on the network. In this case, the PC which controls the SuperPro 7500 acts as a server and SuperPro 7500 acts as a client.
Built-in 144 Pin Driver Most universal IC programmers are designed with 48 pin driver or less. Programmers with a 48 pin driver design need special adapters (pin mapping) to accommodate devices with more than 48 pins. Bottom boards needed for pin mapping can quickly increase production costs just to support one package type. SuperPro 7500 is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.
Stand-Alone Mode Unlike many other universal programmers in the industry, SuperPro 7500 is capable of operating in stand-alone mode. Under stand-alone mode, SuperPro 7500 can be operated by an inexperienced operator with minimal training. Once the project file is selected, the operator only has to insert a blank chip and remove the programmed chip upon beeping. This ensures a minimal chance that an operator will make a mistake. Users can also use clusters of stand-alone programmers to achieve high volume production. Last but not the least, stand-alone mode saves both the cost of PC and labor of the trained and qualified operator.
Technical Support Xeltek is proud to offer same day support for technical and sales inquiries. We are available to help customers and representatives resolve issues or help with their requests in an effective way. This service is provided by our highly qualified new support team that will provide the best of their knowledge to bring prompt sales and technical support.



Advanced Software Features

SuperPro 7500 comes with a powerful and easy to use programming software. The biggest advantage is its simplicity so that any operator can operate the programmer with little or no training. SuperPro 7500 software is supported on Windows Vista, 7, 8, and 10.






Project Files The project file stores preparations before programming. Users could also restore and save work environment. The project file includes device type, buffer data, operation option settings, configuration bit settings and batch commands. Project files may be password protected to increase security and reliability when operated by untrained operators.
Auto Function The Auto function organizes different functions into a sequential group (erase, blank check, program, verify and protect). Functions are executed in sequential order similar to a batch command.
Production Mode Once a chip is inserted correctly, the programmer automatically starts batch command of erase, blank check, program and verify. Auto chip detection saves time and increases efficiency.
Production Statistics A log file could be used to save operation information before exiting the program. Log files can also be used to facilitate quality tracking.
Factory Mode This mode is designed for factory volume production. To prevent operation errors from destroying chips and wrong data written to the chip, SuperPro will operate in the Auto function mode.The administrator can set a password to prevent unauthorized access to the system.
Auto Recognition of File Types We support almost all kinds of known file formats including file formats with automatic recognition functions: Binary, Intel (linear & segmented) Hex, Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.
Auto Increment of Serial Numbers Auto-generation of electronic serial numbers is available on Superpro 7500. This feature is implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode.
Intellectual Property Protection Password settings available in both PC and stand-alone mode.


Certificates

CE Compliant RoHS Compliant ISO 9001 Certified ISO 4001


What's in the box?


SuperPro 7500 comes with

  • Software CD
  • AC Adapter
  • USB Cable
  • SD Card
Optional Accessories



Do you have any questions about SuperPro 7500?


Ask Us Now


Hardware and Electrical Specifications


Devices supported

EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported

DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.

PC interface

USB 2.0, LAN

Stand-alone memory

SD Card

Power supply

AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A

Dimensions

Main unit: 184(L) x 160(W) x 78(H) mm

Package: 310(L) x 250(W) x 145(H) mm

Weight

Main unit: Weight 1.80 lbs (0.80 kg)

Package: Weight 3.80 lbs (1.65 kg)


Expanded Features

  • 144-pin Universal driver
  • For standard NOR/NAND FLASH devices and serial EEPROM/FLASH
  • Four chips can be programmed simultaneously (depends on device type and package).
  • Over 59,000 devices are supported in the SuperPro 7500 library. Adapters do not need DIP lock sockets to transfer, resulting in more reliable connections.
  • Powerful NAND FLASH platform library and exclusive solution for specific cases. Supports dozens of popular NAND FLASH platforms. Quick customization for specific requirements available.
  • Built with 144 universal pin-driver. Universal adaptors are available for various packages.
  • The ninth generation of pin-driver technology supplies cleaner signals, wider voltage range, more accurate and higher clock frequency, supports devices with Vcc from 1.2V to 5V.
  • Chip security mechanism with built-in voltage self-correcting circuit to ensure the voltage is within a preset range.
  • Over-current and over-voltage protection for chip and programmer hardware.
  • Powerful, yet user-friendly software features streamline operations, improve efficiency, and reduce user mistakes during programming operations.
  • Quick free technical and new device support

What is the difference between SuperPro 7500 vs other Xeltek Programmers?

Please refer here to know differences between these programmers.

Should I use a SuperPro 7500 rather than a SuperPro 6100 for NAND chip programming?

Yes, we recommend using SuperPro 7500 for faster programming time. SuperPro 7500 has a powerful NAND FLASH platform library and exclusive solution for specific cases. It supports dozens of popular NAND FLASH platforms and quick customization for specific requirements is available.

Can I use the SuperPro 7500 without a computer?

SuperPro 7500 is capable of operating in stand-alone mode using a SD card.

Is SuperPro 7500 faster than SuperPro 6100 for eMMC programming?

SuperPro 7500 offers 30% higher programming speed and 8-10 times faster programming speed for eMMC devices as compared to SuperPro 6100.

SuperPro 7500 compatible to program multiple chips at once?

Yes, with our specialized Gang socket adapters. Many EEPROM / Flash / MCU / eMMC chips are also supported in 2-Gang or 4-Gang mode to increase throughput by nearly four times!

Is my IC supported?

Please visit our device search tool to check if your IC is supported and also find the correct socket adapter. If you need help in using our device search tool, please click here.

What is a gang socket adapter?

It's a special socket adapter that has four sockets per module allowing you to program four chips at once.

How do I use the Gang Socket adapter?

Please visit our gang socket adapter tutorial for better understanding.

Is there warranty on the SuperPro 7500?

Yes, all Xeltek SuperPro programmers have two years warranty.


If any of your questions is not covered in above FAQs, please refer to our main FAQ page or contact sales@xeltek.com or techsupport@xeltek.com for further questions regarding this product.

4 Gang Programming on SuperPro 7500


Software Download & Device List

SuperPro 7500 Software Device List User's Manual
OS: Windows XP/Vista/7/8/10 (32/64bit) Manual (07/01/13)

The software works without SuperPro 7500 - feel free to try it to see how it works


Can't find your device on the device list? Request device support.

SuperPro 7500 Brochure & Poster

Great and quick
Fast delivery and good technical support service!
Immediate support & attention to query raised.
Technical support assistance was prompt, helpful and timely.
Website and customer service very help and convenient. The programmer has worked great for us and paid for itself many times over. I highly recommend Xeltek for a programmer that you want to ensure is supported down the road.
Great! Thanks
Excellent
I should say thanks to You of your excellent support. I never received the support like this in my experience any of our suppliers.
Samsul was very helpful in resolving my issues. He really put in extra effort to help with a very difficult problem for us. Thanks again Samsul!!!
Write a review

Warranty Support

Standard Warranty: Included with the purchase of SuperPro 7500

  • Two-year warranty on hardware repair services.
  • User requested device updates available during the first year of purchase.**
  • Xeltek covers FedEx Ground when shipping RMA items back to domestic (USA) addresses only.
  • International customers are responsible for shipments both ways.
  • Programmers are warranted to be free of manufacturing or workmanship defects for two years from the date of purchase.
  • For technical support, contact Xeltek via Repair Request or at techsupport@xeltek.com. Calls will be answered in the order it was received. Due to high volume of calls, representatives will respond faster through written request. Calls are accepted during business hours Monday - Friday, 8:00 AM - 4:30 PM (PST).
  • Additional service fee applies to out-of-warranty items.
  • Effective as of January 1, 2015.

**Available on selected Programmers: SuperPro 7000, SuperPro 6100, and SuperPro 6104GP. Due to sample limitations on obsolete devices, support time may vary. Customers are welcome to provide chip samples to expedite algorithm support. XELTEKadds devices upon customer's request at its option. Additional non-recurring engineering (NRE) charge may apply if device update involves socket adapter designing. Device support for out-of-warranty items is $150 -$300 per device request.

Similar Products Similar Products