Xeltek universal programmers support a variety of EPROM/EEPROM chips from many different manufacturers. Xeltek's programmer sand user-friendly software dually provide an efficient way to program the chips. It is important to have a basic knowledge of EPROM/EEPROM chips before programming and also learning how to correctly program the chips w/ SuperPro software.
What are EPROM and EEPROM?
EEPROM stands for Electrically Erasable Programmable Read-Only Memory, and EPROM stands for Erasable Programmable Read-Only Memory. An EEPROM; unlike an EPROM, can be written in or programmed more than once.
Data stored in an EEPROM chip is permanent, unless the user decides to erase and replace the information it contains. Furthermore, the data stored in an EEPROM chip is not lost even when the power is turned off. If you are interested in EEPROM programming, please refer to our EEPROM programmers section.
An EPROM can also retain its data when its power supply is switched off. EPROM devices have two versions: OTP (One-Time Programmable) and UV version. The OTP version EPROM can be programmed once and it can't be erased electrically. Once programmed, the user can only reprogram the area which was not programmed before. The UV version EPROM is a reprogrammable device. After erasing by exposing under strong ultraviolet light, the user can program the UV EPROM again.
Single Socket EPROM Programmers:
From our lowest cost Superpro M (priced at just $595.00) to our high end standalone model SP5000 (supporting 65,000+ devices) we have all the options to cater to your needs.
The following comparison table can help you in deciding your programmer:
http://www.xeltek.com/comparison/SuperPro-Universal-Programming.php
|
||||||||||||||||||||||||||||||||||||||||||||||
|
Gang Programmer If you need mass production capability, check out our SP5004GP, SP5004EGP and SP501S cluster. Please have a look at the following comparison table for deciding which programmer is best suitable for you: http://www.xeltek.com/comparison/SuperPro-Volume-Programming.php
|
||||||||||||||||||||||||||||||
Xeltek also offers EPROM UV Erasers LER 121A and LER 123A models for erasing these chips in order to reprogram.
Our EPROM programmers support a wide range of the most popular devices in the industry and we keep adding new devices in market biweekly to the programmers. Our EPROM support includes 27xxx and 27Cxxx series, and full support for LV series. SP5000 series can program devices with Vcc as low as 1.2V which is lowest in the industry. ICs like Atmel AT27C512, AT27LV020A, ST M27C400, Microchip 27C256 are supported.
NOTE: 1702 EPROMs were PMOS, 27x series EPROMs containing a C in the name are based, without the C are NMOS EPROMs.
Features:
- Supports over 73,295 devices from 272 manufacturers including Eprom, EEprom, Bipolar Eproms, Flash memory, and other popular microcontrollers and PLDs.
- New devices are updated regularly and the device list download is available free on our Download Page.
- SuperPro 5000/5000E, SuperPro 5004GP/EGP, SuperPro 501S/500P and SuperPro IS01 Eprom Programmers are USB interfaced single socket universal or ISP programmers each supporting a different range of devices.
- SuperPro 5000/5000E, SuperPro 501S and SuperPro IS01 Eprom Programmers can operate in stand-alone mode without the need to attach to a PC.
- By operating multiple SuperPro 5000/5000E, SuperPro 501S or SuperPro IS01 Eprom Programmers simultaneously you can use them in a high volume production environment.
-
Following socket adapters are supported by our Gang Programmers:
DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, VQFP, TSOP, TSOPII, SOP, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, μBGA, CSP, SCSP, etc. - Compatible with Windows 98/ME/NT/2000/XP/Vista/7 and x32/x64 bit operating systems.
- Xeltek SuperPro 5000 series Eprom Gang Programmers programs devices at near theoretical minimum programming times which is 2 to 4 times faster than SuperPro 3000 series Eprom programmers.
Device Updates
- XELTEK updates devices and device algorithms regularly.
- You may download the current software version free of charge at our Download Page.
- Updates are available by mail at a nominal charge.
- XELTEK will add devices upon customer's request at its option.
SuperPro Value
- Xeltek offers the highest value in device programming for the programming industry.
- Xeltek holds the position of having the highest number of devices supported: Over 73,295 devices supported in SuperPro 5000/5004GP .
- Free and frequent device updates: bi-weekly.
- Lowest cost of ownership: Only US $995 for SuperPro 501S stand-alone Eprom Programmer
- Highest performance and functionality: stand-alone mode operation with largest device support for the industry, 144pin-driver supporting large size devices, 32bit MCU+ Linux based algorithm engine for very high speed operations, 400+ universal socket adapters to support all types of packages, 1.2 volts device support, Win 7 support, USB interface, surface mounted components used, CE approved, etc.
Warranty Support:
Programmer is under warranty to be free of manufacturing or workmanship defects for two years from the date of purchase. Online Technical Support is also available 24 hours or you may call us during our business hours Monday-Friday 8:30am to 4:30pm (PST).
